Klein Adept out and about pics

A few pics of the Klein Adept out and about with its new brakes and bits:

All black component set now complete.

The latest parts are now complete and assembled on to a re-sprayed 1994 Klein Adept Hybrid frame. The black parts calm down the shocking pink finish somewhat!

 I have found some black Clarks brake pads that match the finish of the brakes nicely:

The picture below shows the brake cable hanger, Klein MC1 shim and a top cap for the Thomson stem.

 

The next picture shows one of the quick release skewers: 

I will follow up with some pictures of the complete bike, I want to take a picture of it in use, rather than leant against the garage wall.

Black Anodising done.

 The parts are back from anodising and now being assembled. Nothing got lost and the shiney black finish is good. I also got the steel brake springs blacked to prevent corrosion.

  Pics of the parts assembled will follow....

Parts logging :)

 As there are so many bits and pieces about to be sent for anodising, I have take a picture of all the bits to be sent then written the quantities on the printout. Hopefully nothing will go missing at the anodisers.....

New bike project parts.

 The latest set of brakes are almost complete, they just need a polish up before being sent for black anodising. Here they are, just set up to check everything fits together nicely:

 Due to the unusual Klein MC1 fork steerer dimensions, fitting a standard stem and bars needs an adapter. In the piccy below there is the black anodised shim made to fit the MC1 size steerer. The brake cable hanger is also complete and topped of with a machined stem cap. All the silver bits will be black anodised.

 New brake cable adjusters are in place and ready for the anodisers.....

  The seatclamp bolt has a machined aluminium cap and nut.

 I have to make the gear cable ferrules, polish all the machined parts plus a seatpost and chainset. Hopefully the whole lot will be fully assembled in a week or two.